The course was very knowledgeable and eye opener on many sections. Every section was interesting and value for money.I am going to apply this in inventory control and production part.

S.D. Muruganand, Supply Chain Manager, Tata International Ltd, Chennai

Very attractive class, first time got introduced to Quality improvement methodologies, very analytical and data oriented, Nice trainer.

S. Sivakumar, Sales Executive, Kalyani Associates Pvt Ltd, Pondy

Easy to understand and follow the training program, better if it would have been slower and with more examples. I suggest the 3 days class may be converted to 4 days with one week break so that we can learn and visualize with our factory operation.

Sangeeth V, Quality Engineer, Vaata Infra Ltd, Kavanoor, Chennai

Very experienced trainer, i could always fall back on Qualimations for all the implementation queries. Good sense of assurance given by the consultant for implementation. The behaviour and problem solving test is very innovative.

Kurien Charles, Piping Engineer,Mumbai

The course made me to understand the importance of quality for a company internally and externally, understood the complete process and implementation techniques. Excellent training, clean and clear, completely satisfied with the session. Plan to implement in MICA Refund process first in our company.

K. Yogesh Kanna, Sr Process Associate, T.C.S, Chennai

Perfect,Interesting and highly educative.I have no regret attending the course because it has broaden my knowledge on how to handle and solve problems in my organization and to tackle the most pressing issues or problems first.Also to always lookout to block all defect as ----- as possible to maximise profit for any organization and minimizing cost.I have gained a lot

I think you need to extend the days of training subsequently

Julie O Kodu , protocol manager/project coordinator, Sea Petroleum & CTAS Group of companies,Lagos,Nigeria

The structure of the course is excellent. The knowledge and skill that I acquired is immeasurable. My thinking ability is now enlarged. I now know how to set up a QA/QC department and the objective of this department and its relation to the whole company.

Extend training for more than 3 days.

Enayoru Solomon , Engineer, Nigeria

The course gives an idea about how to solve or analyse problems, Now only I am aware about QC tools and its techniques. It is really useful for our publishing field since we are receiving various complaints day in and day out. The error should be recorded

S.Gomathi, Asst. Manager, Scientific Publishing services (p) ltd

The course training is good, as a fresher i understood the course well and very interested with the analysis.

Ashish. J . Manjaly, Quality Executive, Taneja Aerospace & Aviation Ltd

Good training..

C.A Cherian, Corporate Trainer, Cochin

Very Good training and organization of contents and clarity. Gave insights into Quality and Management.

Karthik M, Associate Software Engineer, Accenture, Chennai.

The course was really very helpful. Now i have a more broader view on the quality systems and the processes. I had a new way of learning by using statistical datas and relating to the process.

Vineesh.K.Venugopal, QA/QC Engineer, Petromar Piping Systems, Oman

Six Sigma project strategies and Tools of Quality was very effective, the clarity on process and where to focus was there. The ambience needs to be improved.

V.Murali Krishnan, Manager, RR Donnelley , Chennai

Excellent training and crisp material, understanding level is good.

Ambika Shakthivel, Senior Technical Faculty, Footwear Design and Dev Institute, Chennai

Learnt lots of essential concepts for upper management on methods and implementation, the usp of this course is \" clarity on where to focus for improvement\". I gained knowledge on how to maximise revenue through Quality, over all Good course.

K. Varadharajan, General Manager(Sales and Marketing), Race Pharma, Chennai.

Good, Clear in objective with very nice presentation. Suggest to add more software applications examples.

C.L. Babu, Senior Engineer-Testing, Computer Science Corporation, Chennai

Big improvement i the way i think about a process and Quality. Good program and excellent training material. The way the trainer has chalked out the contents and training methodology is immaculate. Excellent content.

Adarsh, Business Architect ( IT ) , SOD Technologies, Cochin

Qualimations set up the Quality Inspection plan and Quality process for our company, the Rubber compounded and its internal mixers quality is monitored round-the-clock by continuously testing samples for their physical properties and chemical characteristics.

Qualimations set up the attribute and variable sampling plans along with process capability has given us huge cost saving while ensuring quality is maintained, previously we were checking every ingredient also checked and monitored regularly; in-process inspection conducted at various stages of production, performance test and final inspection carried out. The sampling is scientific and now robust. The products of Ocean Rubber are certified to meet the most demanding requirements of civil construction, oil & gas, infrastructure, marine and military applications.

Vishnu N, Engineer, Ocean Rubber Factory, UAE

The course is very usefull and it gave me an idea how to approach a problem, planning to apply on a trial basis in my company. The teaching was very systematic.

A Palani, Cargo Controller, Chennai, Malaysian Airlines

Very clear quality of delivering the 6 sigma program, the course material very excellent, feel 100% satisfied as a customer of Qualimations. The Qulimations centre is also excellent.

T. Arun Prasad, Fresher Engineer.

Course Delivery: Excellent
Course Materials: Crisp and Clear
Length of Course: Excellent Could extend beyond 3 days
Course Tools: Very Good
Course Examples used: Excellent

Over all the course was excellent using real time projects by the consultant.

Udhaya Kumar, QHSE Advisor, PROSAFE, Vancover, Canada

Excellent course. I am going to apply six sigma process in my company with my team. Basically I am planning to take a small process work flow and study the process and do FMEA to eliminate the defects.

C.R Prakaash, Asst. Manager, Scientific Publishing Services (P) ltd

Good work, deep knowledge

Bindu Sreekumar , Software engineer, TCS

Today understood how to compute our current sigma level, solve and understand what exactly the customer wants.

J. Raj Manoj, I.E, Link Up Textiles, Chennai

Totally changed my perception regarding Failure mode and effect analysis. This course was very useful as an individual to contribute to the company in maximising revenue and reducing cost at the factory. Got charged up, the training was very practical and lots of examples explained well. Planning to deploy in compounding, dripping and packing process in the company.

D. Mohanaraj, GM Manufacturing, Teleflex medical private ltd.

Very helpful course

Mohammed Savad. P, Student

Good training and it meets the requirement, the material could be structured well, will be applying in my collection call centre.

Jagan Mohan Krishnan, Centre Manager, TCS, Chennai

Very Interactive and knowledgeable session, created lots of awareness on critical areas. The course supports on critical areas and teaches how to look at things from a better way and improvement. The material was useful, problems were practical.

Viswanathan, Fresher, Engineer

The course is taken in a very practical manner and the learning environment is very good. The www.qualimations.com downloads for all the supporting documents is very useful.

Yuvaraj, Production Manager Diacritech Technologies, Pondicherry

It was very nice course to implement and improve the revenue, reduce rejection, find real causes of our defects. I am going to apply six sigma in my existing organization as well as in all organizations where I will work in future also.

Satyabrata Sahoo Dy. Manager, SMS Pneumatics (India) pvt. Ltd.

Increased my knowledge in the quality area, lots of samples with welding quality, welding selection process, WPS,PQR,WPQR.

T. Mahesh, Asst Planner, FUYU Corporation Ltd, Singapore

Good Class, Improved my knowledge, The examples covered gave me real insight into problem solving at work place

Akhil G , Fresher, Cochin

Good material, heads up on sequence of learning will be helpful, plan to apply in order processing for ontime delivery commitments to clients. Would like interaction at workable intervals to guide me on the implementation process control from simple activity.

RaviKumar Balakumar, Project Manager, Emerson Process Management, Chennai

Clear and crisp training, planning to apply in my current process.

Maya Nagarathinam, Control and Compliance Lead, TCS, Chennai

I really did not expect this, you explanations are very clear and made me rethink about the way I was managing and planning quality, also it gave me a perspective of where I come in my organisation.

Please take more company wide programs and at frequent intervals.

Niranjan R , Quality Controller, National Pipes , Saudi Arabia

I feel good after the course. This will improve the quality of work and improve the revenue of the company by minimizing the defects.

Samuel Joseph, Engineer, Fitwel Power Projects Pvt ltd, Gujarat

Good course, very interactive, stress free. The modules given in the book is quite effective.

Nishat Mohamed Fami, Asst Manager, Sundaram Finance

The Six Sigma green belt program helped me very much. The Deep Analysis approach helped me understand some of the reasons for the failure. The Root cause analysis in your course is very good. You spent lot of time explain the definition and analysis of the problem statement, I first thought it was too elaborate and the solution part ended abruptly. I now get the method, only some one like you who solved real problems can get that, great work.

Please have a ready reckoner with examples from all applications ( probably you can avoid the Spot welding example some times).

Rajesh Ram Kumar , Engineer Paint Shop, Hyundai India

Training was good and flow was excellent. The ambience was also good, i want to apply them in my consulting areas. Suggest to add more case studies.

V Shankar, Consultant, ( Ex. Brakes India/Tata Steel), Chennai

The course is very useful for me at this stage, it clearly shows me the path to next quality level that i have to achieve. The approach of this program is very excellent. I will introduce this to all levels including production, design and Quality sections for a start.

G. Mohan, General Manager, Konark Security Services, Chennai

Course Content: Well Designed
Course Leader: Very Communicative and Interactive
Course: Well understood, the speed and presentation is with simple examples, this makes this event successful, eg: learnt the SPC tools very easily and specific to the purpose.
Rating : Very Good
Others: if your program is available online it should be helpful.

I plan to start with the DPMO, rejection analysis and causes to be found out by using QFD / SIPOC.
FMEA is very critical for medical devices as the CE mark certificate is based on FMEA to find the risk factor.

Ramanujam.R, Sr Manager-QARA & MR, TeleFlex Medical Ltd, Pondicherry

Good knowledge, clear communication, clarity on the subject are e positives of the training, the ambience is good,flow,training linking one to one is appreciated. Should improve on the material given and needs a detailed cover.

I am identifying process which will be apt in the collection process. Suggest to give concept and flow in the starting itself.

S. Chandrasekhar, Regional Manager, CITI Financials, Chennai

Your program had lot of insights into strategies for application and I think that's your USP

Include longer one to one sessions during the program, that would help discuss specific problems.

John , Manager, Lufthansa systems

six sigma is helping me to dealing problems in another dimensions .. ever since mostly i was concerned about symptoms rather than actual problems... now it seems i am clear about that issue..
and ur class was perfect..i am totally aware of everything u said under my experience.. but still im lack of experience.. i want to apply it in practical and i am looking toward s that

Sreeram Raman , NDT Trainer, SA

A highly effective course that helps solve problems in a statistical way at all sectors. I am going to apply this in HR department after I finish my course, but may take up few projects to get trained, to apply the theory into practical.

Mirnaalini .B, Student, MSW HR

Could gain a new level in knowledge and perspective, clearly a different experience, the material is good and understanding. Please make the wording a bit simpler. Very good training and many practical examples shown. Expect to apply in my industry.

Prithvi Raj, Engineer, Shakthi Auto Components, Coimbatore

It was really a good experience for me to get involved in such type of course. Instructors were really good and very expert. The duration of the course should be extended if possible.I am going to apply this: -In my home activities. -After getting employed, will apply in my work place too.

Prosenjit Dey, Fresher, B.E Automobile Engineering.

Good to know these methods for improving revenue for the company. Learning the sigma levels and the case study which was interesting.

Joseph, Production Manager, Link Up Textiles, Chennai

This is one of the courses which one would never feel sleepy during the classes. Basically it is a very interactive class session which helped me to view so many basic things in management/manufacturing in a different perspective. Well as of now I am unemployed. Will surely get into a company/firm and would try out the six sigma method, of course with the managements support. Qualimations have given enough confidence for me to believe that I can convince a top level manager of a six sigma methodology in any field.

K.A.Azhar Mechanical Engineer, Fresher

Excellent coaching, good course and clear course material, the class room was good and service was fine, i gained good knowledge out of this training on green belt.

Vel Pandian, Qatar National Facilities Services, Doha

Excellent opportunity to improve knowledge and couching was satisfactory, the course itself is very good.

K.S.Vijaya Babu, Sr Engineer, M/S Craftsman Automation Pvt Ltd

Very Good course with lots of information for development. Real time examples from consulting work helped me to picturize the concept from a company point of view.

Antus Jose, Senior Engineer,Saradha Energy and Minerals Ltd, Raipur

Excellent course and instructor, explains on the concepts, takes trouble to explain with every day examples. Illustrated with actual field problems. As healthcare is relatively new area for six sigma application it will take time but the principles apply. I would consider starting from patient registration and then the billing process.

Dr Satish Kurivilla, Gynaecologist, Pondicherry Institute of Medical Sciences,

Gained good knowledge on Quality management and FMEA, the topics with given book material was very helpful. Would like to know about risk management in projects when six sigma is applied. I am expecting to apply these methods in marketing for preventing failures.

Frijo John, Technology Consultant, Cohesive Technologies Pvt Ltd, New Delhi

This course is very useful for my career, the understanding and knowledge about the process and controls will improve after this course. It guides you to attack the problem form the correct area. The training and the software used were excellent and easy to understand. I am going to apply these methods mainly in machining , welding and shotblasting process.

S. Naren Kumar, Sr Engineer(Quality), NASH Industries Ltd, Chennai

Pls organise more such programs especially for the fresh graduates and before job, pls extend this program to every country.

Airhienbuwa Clement , site Engineeer

The course is good and the training is OK. More time spent on this subject is worth it. Practical examples were provided which is good as most of the participants may not be having knowledge on the depth and complete application of Six Sigma. I will apply this in my company if the top management approves it.

Ezeifezue Chukwuma William, Asst. Production Manager, Nigerdock NIGPLC, Nigeria

Well thought out training process, lots of examples and applications covered in 3 days. The Design for Quality is a good field for me to concentrate in my company, Best wishes.

Suhail M, Zamil Food Industries Ltd, Saudi Arabia

The course was a eye opener for me as it taught me my role as a Quality Engineer and what i should do as a Six Sigma person. The session will have a good impact on my career growth. I Like the way the course was conducted.

R. Ravichandran, Quality Engineer, Drill Jig Bushing, Ambattur SIDCO

After training, a lot of doubts were cleared, and I think by applying six sigma , a number of problems in organization may get solved. Going to apply in manufacturing and assembly areas.

Badrinath Mahapatna, Engineer, QA, SMC Pneumatics (India) pvt. ltd.

On a rate of 1-10,The quality of the training program=10

Timing, Starting training on time, Introduce more practical examples(Pictures of projects in a company), suggest to add more examples.

George Nyoho , Nigeria

The training was good and extraordinary and could see a problem in so many ways. It was very useful and has motivated me with new ideas, planning to apply some of these in business.

C. Vignesh, Fresher, Engineer, Chennai

The training is of high Quality and covers many domains. The trainers knowledge in six sigma implementation is shared systematically and in a way i could understand. This has given me more clarity on my own process that i handle daily.

N Pradosh, INDIAN NAVY

The training was very informative and open for interaction, the materials are good, i plan to use six sigma in production process of Bio Tech Industry.

J Balachandar, Production Manager, MOANA Technologies, Visakhapatnam

The course was so useful, the factors were explained understandably in simple language, enough study material with interesting application and examples. Good hospitality, thank you. I am planning to apply to start with on the diesel consumption and cost reduction in my maintenance area.

R. Kannapiran, Maintenance Supervisor, SRM University

The planning and organisation of this training is excellent. It incorporates enough case studies and brain storming exercise to impact effective learning and understanding. The Quality of the course is indeed splendid.

Omgbonga , Nigeria

The course just gave me an in depth knowledge on the processes and how it is done. But shall improve the focus based on the freshers side too since they have little idea of applying it practically.
I am planning to apply six sigma in my company, that too in the process i am working with so that i will be able to correct them.

Bharath G, Production Engineer, Kerns Aero Products pvt. Ltd

The course is useful and plan to apply these methods for my business to run profitably. I felt the course was very important from all the aspects. The methods could be applied in all areas or departments in an organisation, good teaching and hospitality.

A. Zahir Abbas, Entrepreneur, Chennai

Really helped in understanding the basics of Six Sigma as well as various tools for implementing effective solutions. Also gave me a picture of how we can capture the voice of customer and analyse whether our company goals and functions meet their requirement through Quality Function Deployment.

For starters I would like to start by measuring the initial Sigma level of various processes. Then monitor the health of the process by process capability. After which if there is variance found, and then DMAIC methodology will be implemented. Surely this will be achieved only by cooperation from other departments(operation).

Saad Ghani Siddiqui, Engineer, SUBROS LTD

The training imparted was of a very high order in quality. The trainer has tremendous domain knowledge across multiple disciplines and we have benefitted a great deal from it.The ambience of the class room etc. was also very conducive to the training. This program has changed my perspective on process quality and helped me realize the importance of quality in profitability of a production process.

Quality of hand notes can be improved upon by illustrations colour contents etc. The reference material can also include sources of relevant information's like books online resources etc. A few more case studies could be in cooperated as assignments .

B.S.Ajith Kumar , Engineer, INDIAN NAVY

The training on the Deep Analysis of problem solving is worth mentioning, it has changed my thinking process totally. Statistical process control on what does R chart control mean what I should do is very clear now. Hope to implement this well. The quality of the training material is also good, please add more case studies, thank you.

Rajesh T V , Mechanical Engineer, Coimbatore

Good course,

S Mohan, QA Manager, Link Up Textiles, Chennai

The training was an eye opener for me on the knowledge of Six Sigma and applying its quality tools in problem solving. The training was satisfactory. I am planning to apply this in my company.

Akpavie David Okeoghene, M.D, Signet Business Option, Nigeria

It is a very interactive, practical and nicely formulated training session. Very useful for the experienced middle level management. The quality of knowledge of Trainer is of very high order, which is very useful for Indian industries to implement in some critical processes like hospitals, main engines, manufacturing, oil and gas. Thats how we can be competitive with International companies. I would like to implement in marketing department to find out more market place for our products, to improve customer ratings, customer based pricing.

P.Naresh Project Coordinator, Elcome Integrated Sys. EX Indian Navy

Improved my knowledge will add to my CV. highly experienced trainer.

Deepu Madhavan, Fresher, Mumbai

The greenbelt course was full of practical application and all examples were real time and useful. The strength of the course is the Strong emphasis on the concept. Could have given agenda on first day itself and training material also has these examples, i expect to implement these methods in the next 2 months.

Saravana Kumar, Senior Consultant - QMS, ACME (INDIA) MARKETING &SERVICES LTD.Coimbatore

The consultant took extra effort to make me understand the concept of failure mode/causes/effects thank you. really a great course with lots of application and some times even tactics and strategies for implementation.

Rick peliciant, Abudhabi

Good course, suggest some project to do based on the workshop. Planning to apply in the quality and production department where I am working

Nishantha Govindharajan, Quality Analyst, Kerns Aero Products pvt. Ltd

This course is very interesting and knowledgeable. Among all the quality studies, this is really effective course. Six sigma can be applied anywhere. But I am very interested to apply it in a process or department which goes out of limit in our company, that is, a stage in our company where we receive more number of resupply or rework which kills time and energy.

Abirami .A, Production Executive, Scientific Publishing Services (P) ltd.

My thinking and view of quality improvement is changed, many tips on how to work smarter and achieve the goals. My Confidence level is increased.

R. Anbuselvan, Manager, EverMellow Pvt Ltd, Thirupur

Training gave an in-depth understanding of six sigma, lots of ideas and thought process covered in the course. Had a significant 3 days and a complete value for my time. I would be happy to see exercises after every QFD.FMEA. I thoroughly enjoyed the classes and examples were from my line of expertise as well.

Lakshmi Venkatraman, Business Analyst , NEWGEN InfoTech, Chennai

I enjoyed the program and the quality is also very high.I would recommend this program to all people to improve their analytical and problem solving skills

More time should be allotted for the program to fully grasp without rushing up the essentials

Orubebe , Hallex Engineering, Welding Engineer

Over all a good course, the strength of the course is the Quality function deployment and Failure mode Effect Analysis. Could improve on overall flow and link each tool with each step of DMAIC.

Dhandapani Janardhanan, Manager-Quality, Aricent Technologies(Holdings)Ltd, Chennai

Learned lot of things, need more number of practical sessions. I am going to apply six sigma process in editing and typesetting because if we apply this, quality level Will improve and reduce the cycle time. Finally we reduce the turn out time and get more pages from the customer that will increase our company revenue and most of them will grow.

S.Chinnikrishnan, Managing Copy Editor, Scientific Publishing Services (p) ltd

Very informative and very good systematic training. The training is very practical oriented with applications.

P. Gopalakrishnan, Asst Manager, Teleflex Pondicherry

Congratulations for giving such a wonderful training program. Most of all I did not know about the training program. Thanks for launching such a working training program called Six Sigma

Give more simple eg for everything, Update it on the site

Ajmal Usman Sahib , Doha

Well Structured, simple explanations, easy to understand, good energy and positive approach. Ample material, rich online and offline material adds lots of value. Profound understanding, interesting and inspiring approach to make statistical application interesting.

S. Vikram Kumar, Manager Strategy, UAE Exchange, UAE

This six sigma course was very useful to me, I have learned many quality related aspects and problem solving methods. Some of the analysis reports shown could be used for updating on improvements and customer feedback. The training was very simple and understandable. Also i am planning to apply this in new tool development and in process studies as this area has constant problems.

G. Muthu Raman, Production Manager, National Plastics Technology, Chennai

The trainer has deep understanding on how to handle problems and solve them. The quality cost vs the service level ratio analysis was simply fabulous. Your analytics methods has helped redefine our travel systems, thanks a ton

Jayaseelan , Manager, AMEDEUS SYSTEMS

Well, After? the course I learned 6 sigma is not rocket science but common sense and, I was practicing at work place with noices. Now I can confidently? say it is six-sigma concepts, I have to mention here?with risks I was ?practicing the concepts at work place?I could able to improve from 20% to 30% ( team contribution)?in my past position .I will drive to achieve 60% and trigger the IT dept for global certifications.

Be more organised on the presentation with more attention on the links to other modules in the course .

Vinayan John , Technical Support Engineer, AL-Futtaim Group

Good. Practical oriented with real time examples. Planning to apply in a new Engineering company which makes conveyor belts.

Srijith Kumar. B, General Manager, CHR SERVICES

Previously I didt know how to use SPC, but now I can use it. FMEA is awesome by which I can go deep into the process and identify all the failures, its effect and control. Planning to apply this in my company in casting section.

Sujith. D, Asst. Manager-Quality Assurance, Amrit Durapart Pvt Ltd, Unit-II, Punjab

Excellent training program and the trainer explains very well. The programme is very useful. Planning to apply this in primary production area.

M.Jagadeesan, Asst Manager, Teleflex, Pondicherry

A knowledge sharing and knowledge testing course. Have a great scope in the future. Six Sigma process can be applied in any financial and analytical areas pertaining to my field in which I am going to work in the future.

B.Sruthy B.Com Accountancy Graduate, Fresher

-Interactive session -Needs good videos to clarity. Going to apply in the pagination department. I would like to implement in marketing department to find out more market place for our products, to improve customer ratings, customer based pricing.

V.Sriram Assistant Managing Editor, Scientific Publishing Services pvt ltd.

Had a great time learning six sigma at qualimations, in hospital plan to focus these efforts on TAT in OP.

Dr.Balagurunathan, GURU Multi Speciality Clinic

It is perfect. I am short of words, the environment, human interaction,well done.its more than quality control. Just perfect. God bless your endeavours in life

Improve on any area you deem necessay,but for me its just perfect .

Ambaiowei Segu Oieinbrakabi , Ambaiowei Segu, Nigeria

The course and the supporting book material is good. The support through qualimations website is very useful. The guest talk by the General Manager BHEL was in line with what i expected.

S. Edwin Arul Joseph, Welding Inspector, Mercury Engg, Qatar

It was a very informative course on Six Sigma; it helped me to be more industry ready. I wish to use it in my calibration field starting with the X-chart and R-chart.

Niranjan Thimmappa, Calibration Estimator, Arabian Calibration Dev. Rep. Co. LLC, Sharjah, UAE

I came to know about Qualimations from the Net and it was really helpful. Training was good with complete knowledge on the six sigma methods. Over all it was fabulous, \" Too Good\".

E Subhashini, Cognizant Technologies, Chennai

Frankly speaking, I redesigned my NDT training process and started focusing more in line with what you do, your emphasis on the measurement is very critical. Thank you for all the great support.

I am still surprised about the simple examples you took to emphasis a great quality control technique. I think more than the course its the creative training method that made it so fascinating.

Majid raufoq , Trainer, ARAMCO, SA

Very good course, in our company lots of breakdown on cranes, plan to apply to this aera first.

N. Arun, Senior Engineer, DP-WORLD, Dubai

This course is very much helpful for me and its eye opening. excellent trainer and training material. Plan to apply these concept sin energy saving, break down and rejection reduction in blister packing machines.

P.Baburaj, Maintenance Engineer, Teleflex, Pondicherry

I felt the course is very useful, this training could provide vital difference in me as a engineer when i start working in the company. I will be applying these methods in the project you give me.

T. Karthik, Fresher Engineer, Chennai

Very informative and practical

Anu Rajan, Auditor, Exelles, Kuwait

Good training, All the faculty were friendly. Going to apply six sigma for my company project which is improving the supplier progress monitoring.

A.V Praveen, Quality Assurance Engineer , Toshiba

The course is brief and interactive with chance to share thoughts and clarify issues. My project area is to control breakdown occurrence by six sigma.

V. Prabhu, Asst Manager, Greaves Cotton Ltd

Covered all the subjects w.r.t to six sigma, Time duration not enough for topics particularly for Failure mode effect analysis. Gives many new dimensional about the topics, particularly reporting to management.
Good tool to use in day to day technical environment and personal. Would like to do six sigma projects on the following, customer complaints reduction, Assembly floor rejection/reworks reduction, Sales forecasting, cost reduction-need input from Qualimations.

Thulasiram.D, Manager, LMW-MTD

Good six sigma green belt program. Clipping on applications showed real world usage of six sigma add more of these. I will start a six sigma project within a month. To be discussed in detail in coming weeks.

Rajan P, Senior Engineer, ABB Ltd.

Really good training with practical application. Tuters were friendly and very dedicated to quality science. It is really good to join Qualimations for doing Six Sigma.

Srinivasan Vijayan, Senior Medical officer, Ajuba Solutions Ltd, Chennai

Found to very informative & nice. I will apply Six Sigma approach to my clients & towards imparting training & development of my clients

S.K.Bhaskaran, Freelancer

I have done lots of failure analysis on auto electrical s, applied TRIZ, MTTR,MTBF at micro level, this course supports me in consolidating and aligning with the company measures. The problem solving part is good.

K. Sureshkumar, ADM, TELCON, Jamshedpur

Very useful in understanding the basics, Quality of teaching is good and understandable. Have planned to take up a six sigma project for “reducing assembly floor reworks”

V.Saravanan, Manager-QA, Lakshmi Machine Works Ltd, Coimbatore

Excellent, certainly will let know to friends and recommend to take the course at Qualimations. Plan to take this up at clinical admin in health care sector.

Dr. Arthur Vaneet Surya Kumar, Doctor, Healthcare

Informative and well structured course, got to know many things which we were actually doing but never knew the significance. The first project i am planning is reduction in warranty claims in my company.

Ajith Prasannan, Senior Manager, Production Planning, NADI Air Technics pvt ltd.

It was handled professionally, friendly staffs and explanations were simple and real time examples. Planning to use house of Quality in my appraisal process.

Harinath, AST,TCS

Great to study six sigma in Qualimations. I have project,p100 correction analysis and control, in our company, The six sigma process help to lead the project.

P.Vijayakumar, Managing Editor, Scientific Publishing Service (p) Ltd

Course is good with different methodology. It really improves the way of approach to the problems and resolving errors. In S200 stage, ie. We have three stages,1.author correction, 2.pagination,3.Quality Check The initial department is the author correction where the errors are introduced and our company ratings goes down because of customer feedback. Six Sigma process need to apply in author correction stage to improve m-factor and the rating.

Nisha K.M, TL, Scientific Publishing Service (p) Ltd

Provided good material. Given good explanation on topics. Project topic yet to decide, would do one for mechanical field.

K.Lakshmi, Industrial Engineer, IBM

This Course is very helpful. Trainer’s are very competent in the respective topics with relevant their relevant area of expertise& provided good examples for each topic. I really enjoyed the course with few statistical problems.

K. Karthigayan, QA/QC , STS, Kuwait

Very effective, Must for all the top management

Kumutham.M, First Source, Senior CSA

Very interactive and informative course from qualimations. Willing to explain the topic if required and very useful. I am planning to apply six sigma in our organisation and also in my critical personal decisions.

M.V.Raju Senior Manager-Business Support, Havelock AHI, Bahrain

Training is really good. Staffs are all nice and helpful. Request to provide more IT domain related samples/inputs to get more understanding on the tools. Planning to apply six sigma for the following: Improving administration/operation at statistical level. To understand cost and rework due to too many buffs at each milestone. HR analytic s, to control the attrition and improve the returns followed by cost savings.

A.Vamsidhar IT Head, NOKIA

For me , it is a good eye opener on six sigma, Good Course Material, Class is mixed up with practical scenario which makes it more interesting. I am taking care of DC, Release, CR Revocation and change management, in which I have planned to apply six sigma in Change Management, because TCS doesn't have good SLA in Change management.

S.J.Jayakumar, ATS,TCS

Hi Qualimations, \" Dear Sir I have got job in L&T as Ship repairs in managerial Cadre \"

The six sigma course was useful to a great extent as the complete interview was based on Six Sigma principles. It was a great understanding I got during training which makes every interview easy once U follow the tips given by staff.

NARESH PALURI

Very good, highly informative, designed as per the industry requirements. The course is structured accordingly to the relevance of the participants. Examples & video provided are useful & the problem solving techniques in the course provides a new way of thinking & solving day to day problems faced by the supervisors in logistics & shipping areas.

Shibu. A.O, Shipping Supervisor, MDR Logistics

Good

Nagaraj Sinhasan,Assistant Manager, Greaves Cotton Limited

We took the specialized Quality Function Deployment training alone. The course content was good and upto the mar. The examples used during the session helps me to understand easily. The computer session simulation of QFD for practical implement in my work place is very useful.

Avinash Vyas,officer,Subros Limited

Six Sigma helped me to identify and logically solve problems also document properly the problems behind it so that we could improve it. We are trying to reduce the ticket number to reduce the repetition of processes, thereby reducing the workload and saving time.

Diganta Bhowmik, Programmer Analyst, Cognizant

Short and crisp. Currently a project is a going in our company, would like to apply six sigma on to it.

M.V.P Mohan Sharma, Product Manager, Equitas Finance pvt ltd

The course gives a clear idea on how the engineering and management section are connected.

Sandeep.C.N, Mechanical Engineer, Fresher

The contents and the explanation of the course were easily understood. The faculty were able to address the doubt and clarify them at any point of time. I am planning to implement six sigma by automating the back up procedure restoration by an adaption of the technology with which the block level changes happening at production Data Centre can get replicated to DR storage box.

S.Suresh, Assistant Consultant ,TCS

Very good course and training. Planning to apply six sigma to improve profit of an oil filling unit.

Sandeep Vijayakumar, Maintenance Engineer, Oryx Lubes and Greases ltd, UAE

Faculty training is very good, especially the lead trainer Harikrishnan. Gave many real-time examples that's good. Little bit slow. If fast, can cover more topics and do many examples.

Kosalram M.S, Design Engineer, Ercon Switchgear

Its an amazing course which improves the knowledge about quality of the process. Training module and trainers are very good.

Priya M, IBM, Bangalore

Excellent materials, knowledge of teh trainer is appreciated and support trainers were also good. Great hospitality ande excellent support. Got great exposure to the course that will help implement in my business area.

Balaji Kumar,Operations Manager, MPHASIS Chennai

Very good. Will be contacting Qualimations soon for starting a six sigma project.

Purchase Manager, Azeezid,

Very valuable course for me. In the service sector will apply in the marketing arena. As part of National level promotional plan and brand improvement it could be useful.

C. Rajendran, Customer Relations Executive, KIRTILALS Jewellery Ltd, Coimbatore

Course was taken well by the trainers and could apply the theoretical knowledge into practical with some projects. Hopefully to get into a production company in few years and move on to next level of six sigma.

Anish Thomas, QC Piping Engineer, Nesma & Partners, Saudi Arabia

We took the specialized Quality Function Deployment training. Content is good, Preferably to have objective type questions in examinations.

G.Karthikeyan, Analyst, Subros Ltd

It was a great experience to learn six sigma at Qualimations. I could learn about DMAIC in six sigma and learned how to implement the concepts.

Joby Samuel, QC Engineer, Alico Aluminum & Light Industries Ltd, Sharjah, UAE

Satisfied with the presentation of Mr. Hari, Has given deeper understanding on six sigma tools, methodologies and examples. Real case studies like bake a cake has given thorough understanding on DMAIC process.

Would like to apply six sigma for the following: Parts short supply issues to assembly, Chronic complaints resolution, Reduction on warranty cost, high value internal rejections, cycle time reduction.

K.Dhanabal, Manager-QA, Lakshmi Machine Works Ltd.

The course is excellent and very interactive, plan to apply in ticketing systems.

Selva Prasath, Team Manager, TCS, Chennai

This course is very useful to think widely and from many perspective. I am planning to apply six sigma for reduction of second and third round of proof in S200 QC department.

A.Sathish Kannan, Quality Controller, Scientific Publishing Service (p) Ltd

Fine, practical would be better with group discussion makes and videos for easy understanding, plan to apply in Six Sigma for Manufacturing – Telecom Sector

Gajendran Jayamoorthy, MES Consultant, American Tec

Really helped me to understand on how to analyze the whole process of each requirement and bring out the right solutions. I would like to apply six sigma at work for workflow reduction.

G.Aruna, Associate Consultant, TCS

The training held was very informative and very useful in future. Would like to apply six sigma on psychometric tests.

Shilpa Nambiar, Student, MBA-HR

I did the Six Sigma Green belt course at Qualimation technologies and it was very detailed and informative. I have gained a lot of expertise in Six sigma methodologies and i am sure to utilize these skills in my current process.
The instructors were very knowledgeable and skilled and were able to address and solve my doubts. Overall a very good learning experience.

Sai Anand, Assistant Vice President at Fullerton India Credit Company Ltd.

I got better ideas which I can apply in my process in the office. Definitely it will show difference from others.I would like to apply six sigma for my medical billing field.

Umashankar.S, Account Manager, Lapiz Digital Services, Chennai

Excellent. Trainers clearly explained everything. Cleared all the doubts. Definitely worth.Going to apply six sigma for the following: Quality improvement for creative team..Effective resource planning.

G.Sangeetha, Senior Quality Lead, 2Adpro Media Solutions

Very good course, understood what all things go on in a process, can be implemented anywhere. Faculty was very good. FI am planning to apply six sigma when I will work in any company so that I will know about the processes so that I can improve in my job and be more efficient and increase my knowledge of the process.

Tushar P Robin, Quality Inspector (QA), Kwality Technical Services, Bhopal

Very Interesting and useful for applications in various projects. Clearly understood how to carry about problem solving process using various quality tools and techniques.

V. Vignesh, BE 4th year, SAIRAM Engineering College

Though working in the Quality Department, i was not aware of many aspects in quality, very informative and educational. I am planning to apply it on welding , coating of pipeline installation in which i find a lot of scope.

Vishwanath Pallavur, QC Coordinator, AGIP KCO, Kazakhstan

Provoked a sense of practical application in each and every process we looked around to improve Quality. Majority of the topics were covered to ensure real understanding.

Devee, Senior Medical officer, Medical Coding, Ajuba Solutions Ltd, Chennai

Very insightful & refreshing. It had very good examples to support the Theory, also the program has been paced well & made the understanding of concepts very easy I will apply Six Sigma process in my manufacturing process as well as in the admin Department

Srikant GV, Visaka Wires Vizag

We have learn a lot about real time problem and their solution in respect of six sigma approach.

Rishab Shukla, Manager, Greaves Cotton Limited

I liked the course very much, knew lot of things about application of six sigma in various industry, Thanks to your valuable guidelines.

Balasubramani.R, Team Leader - Production, Freudenberg Nonwovens India Pvt Ltd

Good Training from Qualimations.

Thangappan,Assistant HR Manager,Diacritech

The course was very helpful to understand the details of six sigma.

Glyson.k.Thomas, Engineer, Fluid Line Engineering, Kanpur

It is very useful for every quality engineering professional to have a wide knowledge for giving company huge revenue by controlling defects as well as for career development on its own. Six sigma is needed to be applied in my everyday work to control defects in specified limits. As I am working in logistics area, where, I can control the field complaints received from customer end over dispatching issues, in order to reduce work order value and for increase in company’s profitability. Soon will come and contact you for the ideas and suggestions for completing the project.

S.Lokesh, Quality Engineer, KONE Elevator India (P) Ltd., Chennai

The course provided a more practical dimension to using the statistical tools and how to interpret the results in a very effectively for decision making. It provided insights into varied industry for better understanding.

Nirmal Jonn Zacharias, Division Head, Share Micro Fin Ltd

Course is very informative and useful to resolve shop floor problems. Would like to apply six sigma for the following:-Reduction of customer complaints, Reduction of shop floor complaints.

K.Nagarajan, Manager-QA, Lakshmi Machine Works Ltd.

First of all i would like thank Qualimation to provide such type very good knowledge to me. last three days learn lot, lots of samples of six sigma shared, details and applications of Quality function deployment, SIPOC, DMAIC, interlink with QFD, Pareto analysis, accuracy and precision,SPC, FMEA, policy of deploying and running six sigma projects.

Jeevanandam sundaram, HOD - QMS & QA at EL FORGE Ltd

Very useful and informative, Good coordinated effort from the trainers. Thanks for teaching the basics and confidence for career growth.

R.Kalarani,Senior Medical Coder, Ajuba Solutions lted, Chennai

Learnt new things about quality, It helps me to drive better solution. Need dynamic relationship

L.Vinodh Kumar, Mechanical Engineer, Fresher

It was very useful for me for self motivating, self realization, and self improvement and for moving forward from the current level. It will be very useful for company for decision making areas, ROI, to develop more and maximize profit and wealth.
I shall apply six sigma principles in capital budgeting, forecasting and various budgets to reduce the variation and place data in center.

T.Ramesh, Finance & Accounts Manager, Race Pharmaceuticals Pvt. Ltd.

Overall good course.

I.S.Madhavan,Sr.Inspection Engineer,TUV India Pvt.Limited

Very Informative and informative sessions, the support and assistance after the course is appreciated. Sure to recommend Qualimations to fiends.

Anbu, P, Journal Manager, Reed Elsevier

Very well designed course, the attitude to problem solving is now changed. Every management student needs this clarity, no matter what specialization. Lots of Marketing perspectives covered.

Mayanth Parkhi, XLRI, Jamshedpur

Valuable course. Good lecture on concepts with examples. Even though aware on QC tools, the way of explaining on FMEA, cost of quality are appreciable. For FMEA, still more time required. Would like to apply six sigma for controlling of rejection of casting process (rejection analysis) and improvements on enhancing the process to eliminate wastages.

G.Sivakumar, Superintendent, Lakshmi Machine Works Ltd

The application of process capability and one developed exclusive for my situation in the workshop is useful for me. Take long time out o the training hours to develop this new technique, but it is worth the effort. Thanks you Mr Hari.

Nilmal Singh, Central Workshop Head, IMS, BIhar

Very useful to us. Thank you.

A.V Subramaniam QC, Final inspector, SUSPA Pneumatics India Pvt. Ltd